| Features: |
Double side PCB for high reliability
Built-In class B EMI filter (AC or DC input)
DC inputs 12 / 24 / 48 VDC for DC/DC type
Low leakage current medical model (Optional)
CE marked to low voltage direct |
 |
| Specifications: |
| Parameter |
Description/SPEC.: |
| Input voltage |
90 ~ 264 VAC |
| Input frequency |
47 ~ 63 Hz |
| Inrush current |
40 A typical, cold start @ 25¢XC, 115 VAC |
| Hold-up time |
16 mS typical at full load @ 115 VAC |
| Turn-on time |
1 sec. max. at full load @ 115 VAC |
| Line Regulation |
¡Ó 0.5 % typical |
| Load Regulation |
Main output ¡Ó 5 %, AUX. Outputs ¡Ó 10 % Typical (Note 1) |
| Efficiency |
> 65% typical at full load |
| Noise & Ripple |
1% typical full load (Note 2) |
| Overshoot / undershoot |
5% max. @ Turn-on / turn-off |
| Remote sense |
250 mV ¡Ó 50 mV @ V1 at full load |
| Protections |
OVP, OCP, Short circuit protection |
| Operating Temperature |
0 ¢J to +50 ¢J |
| Storage Temperature |
-40 ¢J to +85 ¢J |
| Safety |
UL, CE-TBD., TUV TBD. |
| EMI |
FCC & CISPR class B, meets EN61000-3-3, -4-2, -3, -4, -5, -6, -8, -11 |
| Dimensions |
6.8" x 3.8" x 1.5" |
| Notices: |
Note 1: Cross/ Load regulation is tested at 10% to 100% of reated load and other outputs are set at 50% of rate laod.
Note 2: Measurements with 20MHZ bandwidth and terminated with a 10uF electrolytic cap. in parallel with a 0.1uF ceramic cap. |
|
|
| No. |
Model |
Input |
Output |
Iomin |
Iomax |
Load Reg. |
Power |
| 1. |
LTE180U-D12 |
90-264 VAC |
+ 5.00VDC
+ 12.00VDC |
1.50A
.60A |
18.00A
7.50A |
±5.00%
±5.00% |
180.000(w) |
| 2. |
LTE180U-D14 |
90-264 VAC |
+ 5.00VDC
+ 24.00VDC |
1.50A
.30A |
18.00A
4.00A |
±5.00%
±5.00% |
180.000(w) |
| 3. |
LTE180U-D1B |
90-264 VAC |
+ 5.00VDC
- 5.00VDC |
1.30A
1.30A |
18.00A
18.00A |
±5.00%
±10.00% |
180.000(w) |
| 4. |
LTE180U-D24 |
90-264 VAC |
+ 12.00VDC
+ 24.00VDC |
.60A
.30A |
8.00A
4.00A |
±5.00%
±10.00% |
180.000(w) |
| 5. |
LTE180U-D2C |
90-264 VAC |
+ 12.00VDC
- 12.00VDC |
.60A
.60A |
8.00A
8.00A |
±5.00%
±10.00% |
180.000(w) |
| 6. |
LTE180U-Q02C1 |
90-264 VAC |
+ 3.30VDC
+ 12.00VDC
- 12.00VDC
+ 5.00VDC |
1.00A
.40A
.40A
.80A |
13.00A
5.00A
1.40A
12.00A |
±5.00%
±5.00%
±10.00%
±5.00% |
180.000(w) |
| 7. |
LTE180U-Q12C4 |
90-264 VAC |
+ 5.00VDC
+ 12.00VDC
- 12.00VDC
+ 24.00VDC |
1.30A
.35A
.10A
.10A |
16.00A
5.00A
2.00A
1.40A |
±5.00%
±5.00%
±10.00%
±10.00% |
180.000(w) |
| 8. |
LTE180U-Q12C5 |
90-264 VAC |
+ 5.00VDC
+ 12.00VDC
- 12.00VDC
+ 48.00VDC |
1.00A
.30A
.10A
.10A |
14.00A
4.50A
2.00A
1.20A |
±5.00%
±5.00%
±10.00%
±10.00% |
180.000(w) |
| 9. |
LTE180U-Q12CB |
90-264 VAC |
+ 5.00VDC
+ 12.00VDC
- 12.00VDC
- 5.00VDC |
1.30A
.50A
.10A
.10A |
17.00A
7.00A
1.40A
1.40A |
±5.00%
±5.00%
±10.00%
±10.00% |
180.000(w) |
| 10. |
LTE180U-Q13D4 |
90-264 VAC |
+ 5.00VDC
+ 15.00VDC
- 15.00VDC
+ 24.00VDC |
1.30A
.20A
.15A
.10A |
16.00A
3.50A
2.00A
1.50A |
±5.00%
±5.00%
±10.00%
±10.00% |
180.000(w) |
| 11. |
LTE180U-S0 |
90-264 VAC |
+ 3.30VDC |
.00A |
36.00A |
±3.00% |
180.000(w) |
| 12. |
LTE180U-S1 |
90-264 VAC |
+ 5.00VDC |
.00A |
36.00A |
±3.00% |
180.000(w) |
| 13. |
LTE180U-S2 |
90-264 VAC |
+ 12.00VDC |
.00A |
15.00A |
±3.00% |
180.000(w) |
| 14. |
LTE180U-S3 |
90-264 VAC |
+ 15.00VDC |
.00A |
12.00A |
±3.00% |
180.000(w) |
| 15. |
LTE180U-T012 |
90-264 VAC |
+ 3.30VDC
+ 5.00VDC
+ 12.00VDC |
1.40A
1.40A
.20A |
16.00A
16.00A
3.00A |
±5.00%
±5.00%
±10.00% |
180.000(w) |
| 16. |
LTE180U-T124 |
90-264 VAC |
+ 5.00VDC
+ 12.00VDC
+ 24.00VDC |
1.50A
.50A
.10A |
18.00A
7.00A
1.00A |
±5.00%
±5.00%
±10.00% |
180.000(w) |
| 17. |
LTE180U-T12B |
90-264 VAC |
+ 5.00VDC
+ 12.00VDC
- 5.00VDC |
1.50A
.50A
.10A |
18.00A
7.00A
1.40A |
±5.00%
±5.00%
±10.00% |
180.000(w) |
| 18. |
LTE180U-T12C |
90-264 VAC |
+ 5.00VDC
+ 12.00VDC
- 12.00VDC |
1.50A
.50A
.10A |
18.00A
7.00A
1.40A |
±5.00%
±5.00%
±10.00% |
180.000(w) |
| 19. |
LTE180U-T14C |
90-264 VAC |
+ 5.00VDC
+ 24.00VDC
- 12.00VDC |
1.40A
.25A
.10A |
18.00A
3.50A
1.40A |
±5.00%
±5.00%
±10.00% |
180.000(w) |
| Other Informations: |
| LTE180U |
 |
|
|
